home     sitemap     about Pero     our addresses     fairs, events     mail    

deutsch     français     česky     po polsku     по-русски    

At this internet-site you will find

Safe Operation with Chlorinated Hydrocarbons

PERO vacuum cleaning machine "V1"

PERO vacuum cleaning machine "V0" - "V2" - "V3" - "V4" - "V5" -

Safe working with Chlorinated Hydrocarbons

  • These plants are modern, fully sealed vacuum systems where virtually no solvent escapes during operation.
  • All important components of the plant are accommodated within a sealed casing.
  • The entire casing is closed of the German Water Act. If worse comes to worse, this pan will catch the entire solvent volume of the plant.
    Thus, groundwater contamination is avoided.
  • The plants of the "2500-V" family are fully automatic machines with a PLC system: the washing modes have been programmed and can be called up by pressing a button or by means of a bar code.
  • PERO plants meet the strict limit values imposed by law for the installation and operation of such solvent cleaning systems.
  • Due to the vacuum technology, operators are not harmed by odors at their place of work; this applies even in case of operating errors. No chlorinated hydrocarbon will escape with the articles processed. The plant as a whole is absolutely leak proof. Solvent consumption only occurs in the handling area, and the rate of consumption can be reduced to a minimum.
  • Due to the construction of the machine, no exhaust air is produced so that no yearly checks by any industrial supervisory board is required. A measuring instrument for monitoring and recording (printer) is available. However, the plant carries out automatic monitoring even if no measuring instrument is installed.
  • The patented PERO cooling technology also contributes to the fact that this plant series is the optimum solution in terms of emission rates and solvent consumption.
  • The dirt washed off the work pieces is deposited in sealed filters which are dried automatically. The filtered matter is removed in an odorless state. If a change-over filter is used, the plant need not be shut down for filter maintenance. The smallest filter unit available is a 5-µ-filter. (.2 micron inch.)
  • For the PLC, a S7-300 system with very convenient programs is used. All parameters can be freely selected. The plant comes with a cycle counter and an operating hour counter.
    • top

    PERO vacuum cleaning machine model "V1"

    Sorry,
    this part of our internet-site is not yet ready
     

    photo PERO cleaning machine V1

    PERO cleaning machine "V1"

    or do you want to have a look to a big picture (191 KByte)

    The "V1" in short key words:

    Technical Data of the cleaning machine "V1"

    max. basket size
    		530 x 320 x 200 mm H
    or
    530 x 365 x 250 mm H
    max. basket weight 80 kg
    appr. cleaning time for steel (min/80 kg) 6 min
    solvent volume   ~ 230 l
    rate of distillation ~ 80 l/h
    outside dimensions   width 2.400 mm
    length 1.420 mm
    height 2.200 mm
    top

    PERO vacuum cleaning machine model "V0"

    Sorry,
    this part of our internet-site is not yet ready
     

    Technical Data of the cleaning machine "V0"

    max. basket size
    		370 x 220 x 200 mm H
    or
    412 x 246 x 132 mm H
    max. basket weight 50 kg
    appr. cleaning time for steel (min/35 kg) 5 - 6 min
    solvent volume   120 - 165 l
    rate of distillation ~ 60 l/h
    outside dimensions   width 950 mm
    length 1.990 mm
    height 2.115 mm
    top

    PERO vacuum cleaning machine model "V2"

    Sorry,
    this part of our internet-site is not yet ready
     

    Technical Data of the cleaning machine "V2"

    basket size 660 x 480 x 300 mm H
    max. basket weight   200 kg
    output ~ 8-10 baskets/h
    solvent volume   ~ 760 l
    rate of distillation ~ 230 l/h
    outside dimensions   width 4.190 mm
    length 2.100 mm
    height 2.400 mm

     

    top

    PERO vacuum cleaning machine model "V3"

    Sorry,
    this part of our internet-site is not yet ready
     

    Technical Data of the cleaning machine "V3"

    basket size 1.000 x 660 x 455 mm
    max. basket weight   400 kg
    output ~ 6-8 baskets/h
    appr. cleaning time for steel (100 kg) (VDTrV-R): 7,5 min.
    (VVDTrV-R): 9 min.
    outside dimensions   width 6.080 mm
    length 2.940 mm
    height 2.853 mm
    loading height   ~ 900 mm
    solvent volume   ~ 1.550 l bei VD
    ~ 2.250 l bei VVD
    rate of distillation Per ~ 475 l/h
    KWL ~ 660 l/h

     

    top

    PERO vacuum cleaning machine model "V4"

    Sorry,
    this part of our internet-site is not yet ready
     

    photo of the machinery V4-UNIVERSAL

    Technical Data of the cleaning machine "V4"

    basket size 1.300 x 850 x 500 mm
    max. basket weight   650 kg
    output ~ 3-4 baskets/h
    appr. cleaning time for steel (650 kg) (VDTrV-R): 15 min.
    (VVDTrV-R): 18 min.
    outside dimensions   width 7.020 mm
    length 2.940 mm
    height 3.550 mm
    loading height   ~ 1.010 mm
    solvent volume   ~ 2150 l bei VD
    ~ 3800 l bei VVD
    rate of distillation Per ~ 635 l/h
    KWL ~ 790 l/h

     

    top

    PERO vacuum cleaning machine model "V5"

    Sorry,
    this part of our internet-site is not yet ready
     

    photo of the machinery V5

    Technical Data of the cleaning machine "V5"

    basket size 1.250 x 850 x 970 mm
    Europallet
    max. basket weight   1.000 kg
    output ~ 2-5 baskets/h
    appr. cleaning time for steel (100 kg) (VDTrV-R): 12 min.
    appr. cleaning time for steel (1000 kg) (VDTrV-R): 18 min.
    (VVDTrV-R): 25 min.
    outside dimensions   width 7.020 mm
    length 2.940 mm
    height 3.550 mm
    loading height   ~ 1.010 mm
    solvent volume   ~ 2.800 l bei VD
    ~ 5.000 l bei VVD
    rate of distillation Perc ~ 635 l/h
    hydrocarbon solvent ~ 880 l/h

     

    top

    The product information and technical data on our websites give a quick survey over our range of products.
    They are no request for buying. The information given on our websites is not sufficient as a decision for investment. Before deciding for a PERO installation, please contact one of our technical consultants to verify the suitability for your specific needs. In most cases test cycles with sample parts in one of our showrooms are necessary.

    Our websites support your search for a suitable machine. We are not liable for correct or complete contents, nor for the correctness of examples for application, opinions or other information you might find.
    We reserve the right to modify or not our websites at any time.

    home     sitemap     about Pero     our addresses     fairs, events     mail    

    deutsch     français     česky     po polsku     по-русски    

    imprint


    © PERO - version: 17.11.05